Precor EFX546 Manual de servicio descargar pdf (Pagina 89)

C546 Elliptical Fitness Crosstrainerl

Page 89

7. Replace mounting nut that secures the speed sensor to the frame.

8. Reconnect the speed sensor cable to the lower PCA.

9. Re-install the rear cover, then check the operation of the C546 as described in Section Four.

10. Remove the left rear cover.

11. Disconnect the speed sensor cable from the lower PCA.

Diagram 7.17B - Speed Sensor Mounting (version 3)

12. Remove the mounting nut that secures the speed sensor assembly to the frame. Thread the

speed sensor out of the frame.

Replacing the Speed Sensor Assembly

13. Thread the replacement speed sensor into the frame as far as possible. Rotate the

crankarm until the magnet in the crankarm is next to the speed sensor. Thread the speed

sensor out of frame, as required, to set the distance between the speed sensor and the

magnet to 1/4 inch.

14. Replace mounting nut that secures the speed sensor to the frame.

15. Reconnect the speed sensor cable to the lower PCA.

16. Re-install the left rear cover, then check the operation of the C546 as described in Section

Four.

Speed Sensor

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 117 118

Sin comentarios

Precor EFX546 Manual de servicio Pagina 89